Overview
Enviro Testers sampling tester ammonia with zero-point automatic tracking; long-term use will not be affected by the zero drift. Multi-level calibration for target points, can ensure the linearity and accuracy of the measurements. Chinese and English interfaces can be selected. Broad operating temperatures -40 °F to 158 °F (-40 °C to 70 °C) and temperature compensation is supported. Record the calibration logs, repair logs, failure countermeasure solutions, sensor service life due reminder, and function of reminder for the time of the next concentration calibration. Meet the requirements on the design of the intrinsically safe circuits, such as anti-static, and anti-electromagnetic interference. The protection level is up to IP65, and it is possible to prevent the splash of water, dust, and shock.
Features
- USB Interface (Charging and storage)
- Multi alarm mode
- Three display Interface
- Use clip, easy to carry
- Clear screen
- Endurance and durable
Technical Specifications
| Gases To Be Detected | Arbitrary combination of 1 to 4 types of gases such as toxic gases, oxygen gas, carbon dioxide, inflammable and explosive gases, TVOC, and so on. Optional configuration: temperature and humidity measurements. |
| Application Scenarios | All the cases that require the portable rapid detection of gas concentrations such as petroleum, chemical, pharmaceutical, environmental protection, combustion gas distribution, warehousing, smoke gas analysis, air governance, and so on. |
| Detection Range | 0 to 1, 10, 100, 1000, 5000, 50000, 100000 ppm, 200 mg per L, 100% LEL, 20 % , 50 %, 100% Vol, can be selected; and other ranges can be customized. |
| Resolution | 0.01 ppm or 0.001 ppm (0 to 10 ppm) 0.01 ppm (0 to 100 ppm) 0.1 ppm (0 to 1000 ppm) 1 ppm (0 to 10000 ppm or more) 0.01 mg per l (0 to 200 mg per l) 0.1% LEL, 0.01%, 0.001% Vol |
| Detection Principle | Electrochemical, catalytic combustion, infrared, thermal conductivity, PID photoionization, and so on, depending on the type of gas, range, field environment and user demand. |
| Allowable Error | ≤ ± 3% F.S (higher precision levels can be customized) |
| Linearity | ≤ ± 2% |
| Repeatability | ≤ ± 2% |
| Uncertainty | ≤ ± 2% |
| Recovery Time | ≤ 30 seconds |
| Response Time | T 90 ≤ 30 seconds |
| Power Supply | 3.7 V DC, 3000 mA high-capacity rechargeable polymer battery |
| Display Mode | 2.31 in high-definition color screen |
| Detection Mode | Diffusion type measurement. The calibrated flow rate is 500 ml per minute |
| Alarm Mode | It is possible to set it as sound and light alarm, vibration alarm, sound, and light + vibration alarm, turning off the alarm |
| Communication Interface | USB (charging and communication), optional: RS485 communication interface |
| Data Storage | Standard configuration is the data storage capacity for 100, 000 entries |
| Protection Level | IP65 |
| Explosion-Proof Type | Intrinsically safe type |
| Explosion-Proof Mark | Exia II CT4 Ga |
| Humidity | 10% RH to 95% RH |
| Temperature | -40 °F to 158 °F (-40 °C to 70 °C), |
| Exterior Dimensions | 5.11 in × 2.67 in × 1.33 in (130 mm × 68 mm × 34 mm) |
| Weight | 0.44 lb (0.2 Kg) |
Reviews
There are no reviews yet.