Enviro Testers Outdoor Multi Gas Detector

Enviro Testers Outdoor 6 Multi Gas Detectoris suitable for multi gas concentration detection in various industrial environments and special environments.

SKU: ETEOCGD-112 Category:

Overview

Enviro Testers Outdoor 6 Multi Gas Detectoris suitable for multi gas concentration detection in various industrial environments and special environments. With import gas sensor and most advance nanometer semiconductor technology, the product can detect gas concentration rapidly and precisely, and our products are famous of high stability and repeatability. It is fixed installed to detect leakage of flammable gas and toxic gases on industrial sites. It can detect 1 to 6 kinds of gases at the same time. All software automatic calibration, each kind of sensor can calibrate up to 6 target concentration values to ensure the accuracy and linearity of the entire measurement.

 

Features

  • 4 to 20mA,RS485, 0-5V,0-10V,4-20mA+Hart signal output
  • 2 to 3 relays output
  • Multiple transmission options: 3 to 4 core cable
  • Wireless transmission, RTU wireless transmission
  • Multiple data receiving modes
  • Meet the Requirements of Different Industries
  • Adopts high-end imported sensors from different countries
  • Variety gas sensors with long service life
  • Electrochemical, catalytic combustion, semiconductor, NDIR, PID detection technology
  • Infrared remote control to operate in dangerous situations

 

Technical specifications

Gas detected Carbon Monoxide, Oxygen, Ammonia, Sulfur Dioxide, Hydrogen Sulfide, Carbon Dioxide, Methane, Nitrogen Oxide, Nitrogen, VOC, TVOC, Chlorine, Nitric Oxide and other gases(Customize according to user need)
Reaction time ≤20 S(T 90)
Detection accuracy ≤±3%F.S (Depending on the specific sensor)
Linearity error ≤±1%
Zero drift ≤±1%(F.S/Year)
Recovery time ≤20 S
Scalable gas sensor User can customize 1-6 gas sensors in any combination,
Repeatability ≤±1%
Explosion proof sign CNE x 16.05
IP rating IP66
Detection pattern diffusion, circulation, pumping mode is available, online detection
Installation method wall mounting type, pipe type (Screw thread size:0.0248548mi x 0.0590551in(40 M x 1.5 MM)), circulation type.
Signal output 4 mA to 20 mA signal: standard 16bit 4 to 20mA output chip, transmission distance 0.62 mi (1Km)
RS 485 signal: standard MODBUS RTU protocol, transmission distance 2Km
0 5V to 5V,0 V to 10 V output are optional
4 mA to 20mA+Hart signal is available
2 to 3 relays output: Concentration alarm value adjustable contact rating:30 VDC 1 A/125 VAC 0.3 A
Transmission mode cable transmission :3core, 4core cable, long distance transmission 0.62 mi to 1.24 mi (1 km to 2 km)
TCP/IP transmission: supporting TCP/IP protocol, using optical fiber, network cable, long-distance real-time transmission via intranet and extranet network (optional)
GPRS transmission: built-in GPRS module, real-time remote transmission of data, not limited by distance (optional)
Wireless transmission: supporting 433 MHz, radio transmission mode, transmission distance
1.24 mi to 6.21 mi (2 Km to 10 Km) ,depending on power (optional)
Data receiving device PC, Gas Alarm Controller, PLC, DCS, Mobile Phone and Tablet Computer is optional
Alarm setting standard configuration two-level alarm, three-level alarm is optional.
two alarm mode: high alarm & low alarm mode, interval control alarm mode
interval control alarm for temperature sensor
interval control alarm for humidity sensor
Material aluminum, explosion and corrosion proof
Working environment Operating Temperature: -22 ℉ to 122 ℉ (-30 ℃ to 50 ℃)
Relative humidity ≤90% RH,Non-condensing
Pressure 0 kpa to 100Kpa
Power 24 VDC(12 to 30VDC)
Humidity detection range  0 RH to 100% RH
Connection 3 NPT or 4″NPT,1 or 2″NPT, two connection modes are supported at the same time
Accessories User manual, certificate, calibration cover
Executive standard GB3836.1 to 2010 “Explosive Environment Part 1: general requirements for equipment”
Temperature detection range -4 ℉ to 248 ℉ (-20 ℃ to 120 ℃)
Dimensions 7.87402 in x 5.86614 in x 3.11024 mm
(200 mm x 149 mm x 79mm) L×W×H
Weight 3.30 Ib (1.5Kg)

Reviews

There are no reviews yet.

Be the first to review “Enviro Testers Outdoor Multi Gas Detector”

Your email address will not be published. Required fields are marked *