Overview
Enviro Testers gas leak detector is a personal anti-gas detector that can continuously and simultaneously detect a variety of gas concentrations. TFT screen with large color display, up to 4 gas concentrations at the same time, according to the active sensors, the model of the gas concentration display can be automatically adapted. The shell is designed with rubber coated plastic mould, which has good waterproof performance. The detector can meet the requirements of explosion-proof, can be widely used in iron and steel metallurgy, petrochemical, emergency rescue, industrial safety and other industries
Features
- Up to 4 kinds of gas can be customized
- Color TFT display provides continuous real-time display of gas concentration
- English or Chinese can be set
- Failure detection of key components, normal working condition monitoring
- Calibration of overdue reminder function
- Start-up full function test (including sensor fault detection)
- Automatic zeroing and calibration
- Temperature display, the sensor has temperature compensation
- Optional fall alarm function
- Sound, light and vibration alarm methods, With mute function
- Optional units, ppm, lel%, vol%, mg/m3
- Rechargeable lithium-ion polymer batteries
- Display content can be flipped upside down
- Anti-static shell covered with rubber
- Sensors inserted in any position, automatic identification, easy maintenance
Technical Specifications
| Sensor | Electrochemical, Infrared, Catalytic combustion, Galvanic cell and PID |
| Sampling Type | Diffusion |
| Explosive-proof | ExdiblICT3 Gb |
| IP Grade | IP65. Waterproof and Dustproof |
| Carried standard | GB12358-2006 |
| Humidity | 15% to 95% noncondensing |
| Screen | Colour TFT LCD display SENSOR |
| Language | Chinese & English ASSENSOR |
| Display content | Gas symbol, gas unit, real-time value, battery, calibration information, temperature, time |
| Alarm mode | 95 dB/10 cm buzzer, red and yellow LEDs flash, built-in vibration |
| Alarm project | High Conc./Low Conc./TWA/STEL/Overrange/Low battery/Fall down alarms |
| Alarm set point | The limit value can be set freely |
| Calibration method | Zero/full scale calibration |
| Working current | Normal working current 100 mA Alarm current 240 mA |
| Battery type | Li-On rechargeable |
| Battery parameter | Rated voltage 3.7 V, nominal capacity 3000mAh |
| Charging T range | 32 °F to 104 °F (0 °C to 40 °C) |
| Continuous work-hs | Full charge, 20 hours |
| Shell material | ABS. PC. anti-static TPE |
| Working temp. | -4 °F to 131 °F (-20 °C to 55 °C) |
| Size | 5.11 in × 2.91 in × 1.45 in (130 mm x 74 mm x 37 mm) |
| Weight | 0.72 lb (330 g) |
Reviews
There are no reviews yet.