Enviro Testers Metal Pipe Thickness Measuring Gauge

Enviro Testers metal pipe thickness measuring gauge is a simple-to-use, highly accurate, hand-held ultrasonic thickness gauge with the operating principle of ultrasonic wave measuring.

SKU: ETECMTG-203 Category:

Overview

Enviro Testers metal pipe thickness measuring gauge is a simple-to-use, highly accurate, hand-held ultrasonic thickness gauge with the operating principle of ultrasonic wave measuring. It can measure quickly, nondestructively and precisely with a resolution of 0.001 in / 0.01 in

 

Technical Specification

Display Type 128 × 64 dot-matrix LCD screen with EL backlight
Operating Principle P-E (pulse-echo) with dual-crystal probes
Measuring Range 0.03 in to 11.81 in (0.8 mm to 300 mm), depend on material and probe
Measuring Limits of Tube (Steel)  0.78 in x 0.11 in (20 mm × 3.0 mm)
0.59 in x 0.07 in (15 mm × 2.0 mm)
The measuring error is up to ± 0.00 in (0.1 mm)
Measuring Error Low limit to 0.39 in (10 mm): ± 0.00 in (0.1 mm)
10mm to high limit:  ± 1%H+ 0.00 in (0.1 mm)
Note: H is the actual thickness of the testing material
Repeatability 0.00 in (0.1 mm)
Display Resolution 0.00 in (0.1 mm),
Units Inch or Millimeter
Calibration Method Zero calibration, Two-point calibration
V-Path Correction Automatic
Update Rate 4 Hz
Material Velocity Range 0.0394 in/μs to 0.3937 in/μs (1000 m/s to 9999 m/s)
Memory Function 5 arrays are divided to store 500 thickness values
Minimum Value Checking Move the probe along the surface of the testing material, the gauge is able find the thinnest point automatically
Warning Function If the measured value exceeds the pre-set thickness limit, the warning tone will start
Velocity Storage Velocities of 5 different materials can be stored totally
Languages English and Chinese
Communication Port USB port or Serial RS 232 port (Optional)
Application Software Um View Software for transmission, storage, analysis and documents editing (Optional)
Power Requirements Two 1.5 V AA alkaline batteries (Warning with low battery voltage)
Operating Time Up to 200 hours with alkaline batteries (without backlight)
Instrument Shut-off AUTO OFF after 5 minutes of inactivity
Operating Temperature 14 °F to 122 °F (-10 °C to +50 °C),
68 °F (-20 °C) in special requirements
Size 5.86 in x 2.87 in x 1.25 in (149 mm X 73 mm X 32 mm)
Weight 0.46 Ib (210 g) including batteries

Reviews

There are no reviews yet.

Be the first to review “Enviro Testers Metal Pipe Thickness Measuring Gauge”

Your email address will not be published. Required fields are marked *