Enviro Testers Gas Mass Flow Meter

Enviro Testers gas mass flow meters are designed to indicate and control flow rates of gas.

SKU: ETEUMFM-201 Category:

Overview

Enviro Testers gas mass flow meters are designed to indicate and control flow rates of gas. The rugged design coupled with instrumentation grade accuracy provides versatile and economical means of flow control. The built-in electromagnetic valve allows the flow to be set to any desired flow rate within the range of the particular model. The valve is normally closed as a safety feature to ensure that gas flow is shut off in case of a power outage. The LCD readout built into the top of the transducer is tiltable over 90 degrees to provide optimal reading comfort. GFC mass flow controllers are available with flow ranges from 10 SCCM to 2000 sL/min (N2). Gas is connected by means of 1/4 in compression fittings. These controllers may be used as benchtop units or mounted by means of screws in the base. Transducer power supply ports are fuse and polarity protected.

 

Technical Specification

Full scale range (N2) (0 to 100, 200, 500, 1000) SCCM
Accuracy ±1.0% S.P. (≥35% F.S.) 

±0.35% F.S. (<35% F.S.)

Repeatability ±0.2% FS
Linearity ±0.5% FS
Response Time ≤1 sec
Valve Rest Position Normally Closed or Normally Open
Temperature Coefficient Zero: ≤±0.05% F.S./ ℃ 

Span: ≤±0.1% F.S. ℃ (≤30 SLM)

Span: ≤±0.2% F.S. ℃ (>30 SLM)

Zero Drift <0.6% F.S. per year without auto zero
Surface Finish 25 Ra
Operation Temperature 41 °F to 113 °F (5 ℃ to 45 ℃)
Communication Interface for input Signal Digital: RS 485 

Device Net TM

Analog: 0 V to 5 V DC or 4 mA to 20mA

Communication Interface for Output Signal Digital: RS 485 

Device Net TM

Analog: (0 V to 5 V DC or (4 mA to 20 mA

Power Supply ±11 V to ±16 V DC or +11 V to +28 V DC 400 mA)
Electronic Connector D sub 9 pins male, D sub 15 pins male, 

DeviceNet TM male

Differential Pressure 0.05 Mpa to 0.35 Mpa (≤10000 SCCM) 

(0.1 Mpa to 0.35 Mpa (20000 SCCM, 30000 SCCM)

0.2 Mpa to 0.45 Mpa (50000 SCCM)

Max Pressure 435.113 PSI (3 MPa)
Seals Materials Viton, Neoprene
Fittings Swagelok 1/4 in
Weight 2.20 lb (1 kg)

Reviews

There are no reviews yet.

Be the first to review “Enviro Testers Gas Mass Flow Meter”

Your email address will not be published. Required fields are marked *