| Illumination/measurement conditions |
D/8 (diffuse light illumination, 8° reception) |
| Sensor |
Photodiode array |
| Integrating ball diameter |
1.5 in (40 mm) |
| Spectrum separation equipment |
Diffraction grating |
| Measurement wavelength range |
400 nm to 700 nm |
| Measurement wavelength interval |
10 nm |
| Half wave width |
<=14 nm |
| Reflectivity measurement range |
0% to 200%, resolution: 0.01% |
| Lighting source |
Composite LED lamp |
| Measurement time |
About 2 s |
| Measuring caliber |
0.3 in (8 mm) |
| Repeatability |
0.05 |
| Difference between stations |
0.5 |
| Standard observer |
2° viewing angle, 10° viewing angle |
| Observe light source |
A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12(two light sources can be selected simultaneously for display) |
| Display content |
Spectral data, spectral image, chroma value, color difference value, pass/fail, color simulation |
| Color space/chroma index |
L x A x B, LC x H, CMC (1:1), CMC (2:1), CIE94, HUNTERLAB, YXY, MUNSELL, XYZ, MI, WI (ASTME 313/CIE), YI (ASTME 313/ASTMD 1925), ISO width (ISO 2470), DENSITYSTATUSA /T, CIE00, WI/ TINT |
| Storage |
100 x 200 (100 groups of standard samples, with a maximum of 200 test records under each group of standard samples) |
| Interface |
USB |
| Power supply |
Unloadable lithium battery pack 1650 mAh, Dedicated AC adapter 90 to 130 VAC or 100 to 240 VAC, 50 to 60 Hz, maximum 15W |
| Charging time |
Approx. 4 h to 100% capacity, number of measurements after each charge: 1,000 measurements within 8 hours |
| Light source life |
Approximately 500,000 measurements |
| Operating temperature range |
50° to 104°F (10 ° C to 40 ° C), 85% maximum relative humidity (no condensation) |
| Storage Temperature Range |
-4° to 122°F (-20 ° C to 50 ° C) |
| Dimensions |
Approx. 4.3 in x 3.3 in x 7.7 in (0.9 cm x 8.4 cm x 19.6 cm) |
| Weight |
Approx. 2.4 lb. (1.1 kg) |
