Enviro Testers Radiation Meter Detector

This Radiation Meter Detector has a frequency range of 50 MHz to 3.5 GHz, display refresh rate of typically 400 mS, and battery life of > 15 hours.

SKU: ETEIRM-208 Category:

Features

  • 50 MHz to 3.5 GHz frequency range
  • For isotropic measurements of electromagnetic fields
  • Non-directional (isotropic) measurement with three-channel measurement probe
  • High dynamic range due to three-channel digital results processing
  • Configurable alarm threshold and memory function
  • Easy to use
  • High frequency (RF) electromagnetic wave field strength measurement
  • Mobil phone base station antenna radiation power density measurement
  • Wireless communication applications (CW, TDMA, GSM, DECT)
  • Wireless LAN (Wi-Fi) detection, installation
  • Spy camera, wireless bug finder
  • Cellular/Cordless phone radiation safety level
  • Microwave oven leakage detection
  • Personal living environment EMF safety
  • RF power measurement for transmitters

 

Technical Specifications

Sensor Type Electric field (E)
Frequency Range 50 MHz to 3.5 GHz
Directional Characteristic Isotropic, 3-dimensional
Measurement Range (CW signal > 50 MHz) 38 mV / m to 11 V / m
Absolute Error (at 1 V / m and 50 MHz) plusmn 1.0 dB
Frequency Response plusmn 1.0 dB (50 MHz to 1.9 GHz), plus mn 2.4
dB (1.9 GHz to 35 GHz)
Isotropy Deviation Type. Plusmn 1.0 dB f > 50 MHz
Overload limit 4.2 W / m2 (40 V / m)
Temperature Response (32 °F to 122 °F (0 °C to 50 °C)) plusmn 1.5 dB
Measurement Method Digital, triaxial measurement
Directional Characteristic Isotropic, triaxial
Measurement Range Selection One continuous range
Display Resolution 0.1 mV / m, 0.1 muA / m, 0.1 muW / msup2, 0.001 muW / cmsup2
Setting Time Typically, 1s (0 % to 90 % of meas. value)
Display Refresh Rate Typically, 400 mS
Display Type LCD 4 digit
Measurement Units mV / m, V / m, muA / m, mA / m, muW / msup2, mW / msup2, muW / cmsup2
Measurement Display Value Instantaneous measured value, maximum value or average value since power-on
Measurement Average Time (in per-set steps) 4s to 15 minutes
Manual Data Memory and Read Storage 99 sets (only recall by meter)
Battery 9 V
Battery Life > 15 hours
Accessory carrying case and manual

Reviews

There are no reviews yet.

Be the first to review “Enviro Testers Radiation Meter Detector”

Your email address will not be published. Required fields are marked *